Dear all,

I am having problems with exchange 2010 sending emails through a postfix smarthost server which disconnects the sessions. I also use a sendmail as a smarthost server which is working just fine but I have to switch to postfix and cannot do this as long as the encryption does not work.

Here is the log file of the postfix server:

Jan  4 14:18:59 server7 postfix/smtpd[1659]: initializing the server-side TLS engine

Jan  4 14:18:59 server7 postfix/smtpd[1659]: connect from server1.mydomain.com[192.168.20.10]

Jan  4 14:18:59 server7 postfix/smtpd[1659]: setting up TLS connection from server1.mydomain.com[192.168.20.10]

Jan  4 14:18:59 server7 postfix/smtpd[1659]: server1.mydomain.com[192.168.20.10]: TLS cipher list "aNULL:-aNULL:ALL:+RC4:@STRENGTH"

Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:before/accept initialization

Jan  4 14:18:59 server7 postfix/smtpd[1659]: read from 7F4823FA5210 [7F4823FAB1B0] (11 bytes => -1 (0xFFFFFFFFFFFFFFFF))

Jan  4 14:18:59 server7 postfix/smtpd[1659]: read from 7F4823FA5210 [7F4823FAB1B0] (11 bytes => 11 (0xB))

Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0000 16 03 01 00 5a 01 00 00|56 03 01                 ....Z... V..

Jan  4 14:18:59 server7 postfix/smtpd[1659]: read from 7F4823FA5210 [7F4823FAB1BE] (84 bytes => 84 (0x54))

Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0000 54 a9 3d b9 0d 5e 8b 64|7c 6b b5 21 f2 93 e7 84  T.=..^.d |k.!....

Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0010 17 ea 33 d7 e5 13 f2 75|3a 87 38 32 01 85 82 5b  ..3....u :.82...[

Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0020 00 00 18 00 2f 00 35 00|05 00 0a c0 13 c0 14 c0  ..../.5. ........

Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0030 09 c0 0a 00 32 00 38 00|13 00 04 01 00 00 15 ff  ....2.8. ........

Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0040 01 00 01 00 00 0a 00 06|00 04 00 17 00 18 00 0b  ........ ........

Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0050 00 02 01                                         ...

Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0053 - <SPACES/NULLS>

Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:SSLv3 read client hello A

Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:SSLv3 write server hello A

Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:SSLv3 write certificate A

Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:SSLv3 write key exchange A

Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:SSLv3 write server done A

Jan  4 14:18:59 server7 postfix/smtpd[1659]: write to 7F4823FA5210 [7F4823FB8B70] (1911 bytes => 1911 (0x777))

[...]

Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0774 - <SPACES/NULLS>

Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:SSLv3 flush data

Jan  4 14:18:59 server7 postfix/smtpd[1659]: read from 7F4823FA5210 [7F4823FAC803] (5 bytes => 0 (0x0))

Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:failed in SSLv3 read client certificate A

Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept error from server1.mydomain.com[192.168.20.10]: lost connection

Jan  4 14:18:59 server7 postfix/smtpd[1659]: lost connection after STARTTLS from server1.mydomain.com[192.168.20.10]

Jan  4 14:18:59 server7 postfix/smtpd[1659]: disconnect from server1.mydomain.com[192.168.20.10]

I have read in the post at https://social.technet.microsoft.com/Forums/exchange/en-US/6db38364-cb08-45c0-b159-3ddf30ef0b3e/exchange-2010-send-connector-uses-ssltls-and-cannot-connect-to-smarthost-how-to-deactivate-ssl?forum=exchange2010how to deactivate the SSL encryption, but this is of course a security flaw, if I am not mistaken. I would like to encrypt the connection between the servers for obvious security reasons but I have come to a standstill...

My Exchange server certificate is configured as follows:

AccessRules        : {System.Security.AccessControl.CryptoKeyAccessRule, System.Security.AccessControl.CryptoKeyAcc
                     ule, System.Security.AccessControl.CryptoKeyAccessRule, System.Security.AccessControl.CryptoKe
                     essRule}
CertificateDomains : {server1, server1.solid-con.com}
HasPrivateKey      : True
IsSelfSigned       : True
Issuer             : CN=server1
NotAfter           : 22/01/2017 13:18:02
NotBefore          : 22/01/2012 13:18:02
PublicKeySize      : 2048
RootCAType         : None
SerialNumber       : 6925D91285B649BD4D5E4297F1A48471
Services           : IMAP, POP, IIS, SMTP
Status             : Valid
Subject            : CN=server1
Thumbprint         : 939A37173BF84E352CEDC74F7D9A3D71F498A005

AccessRules        : {System.Security.AccessControl.CryptoKeyAccessRule, System.Security.AccessControl.CryptoKeyAcc
                     ule, System.Security.AccessControl.CryptoKeyAccessRule}
CertificateDomains : {WMSvc-SERVER1}
HasPrivateKey      : True
IsSelfSigned       : True
Issuer             : CN=WMSvc-SERVER1
NotAfter           : 19/01/2022 12:56:44
NotBefore          : 22/01/2012 12:56:44
PublicKeySize      : 2048
RootCAType         : Registry
SerialNumber       : 1DB8711F7ADC5CB54196468EF2FF5D21
Services           : None
Status             : Valid
Subject            : CN=WMSvc-SERVER1
Thumbprint         : 191D86BDE274510453D58DDB91D253DABBCF05F1

And My Default Send Connector is configured as follows:

Any help would be greatly appreciated as I am stuck...
Luca

I have Exchange 2010 SP2 Update Rollup 4, SBS 2011 (which is similar to Server 2008 R2). I have recently recovered from a server crash due to a faulty RAID controller and need to recover some e-mail (and possibly contacts) from a couple of mailboxes.

My main concern is that my old .edb file is in a old forest that is different than my current forest. Due to the length of the old internal domain name having more than 15 characters (I previously migrated using a answer file) and my current internal domain name is 15 characters.local they are different.

I also dont have the log files or STM file

With the two internal domain names being different will I still be able to follow this related topic:

http://social.technet.microsoft.com/Forums/zh/exchange2010/thread/8f4eb425-72ff-4d18-abfc-5c00be7113e2

If not please let me know which direction I should be going. I know there are third part tools that can get this done but not in the budget right now.

Teron

Possibly due to a move request some time in the past, I have a situation where one user has a mailbox in two different exchange databases. Both have the same mailbox guid, but judging by the size, one is not actually used. I could use remove-mailbox to delete that one, but I am somewhat cautious. I have been looking for a way to export the mailbox from the database that it is not used from - so far, no luck. Any ideas how I could do that?

Regards,

Urmas Kask

Hi All,

When I search in Outlook Web Access, the search doesn't bring up anything. I have exchange 2010 SP2 and the "Microsoft Exchange Indexer Service" is running.

Event 9842 - Function CISearch::EcGetRowsetAndAccessor detected that content indexing was disabled for database 'maibox databse' because of error '0x80041820' from MSSearch.

Any suggestion please?

Thanks,

MS

Hi,

once a day I receive error in Event log:

Log Name: Application
Source: MSExchangeSA
Event ID: 9320 Task Category: (13)
Level: Warning
Keywords: Classic
User: N/A
Computer: <servername>
Description:
OABGen could not generate full details for some entries in the offline address list for address list ‘\Global Address List’. To see which entries are affected, set event logging for the offline address list generator to at least medium.

So with this tip:

http://cloud.kemta.net/2011/08/set-event-logging-for-the-offline-address-list-generator-to-medium/ 

I was rise OAL Generator level to expert, and update OAB. Error come again, but with still with no details.

Is another way to see what entries in the offline address list for address list '\Global Address List' are bad?

For example step by step logging of generation OAB?

Regards

NETWolF82

Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:04
Failed

Error:
Active Directory operation failed on EXCHANGE This error is not retriable. Additional information: The parameter is incorrect.
Active directory response: 00000057: LdapErr: DSID-0C090B8A, comment: Error in attribute conversion operation, data 0, v1db1

The requested attribute does not exist.

Hopefully that title sums up my weird problem; as of today, one user can no longer access my Exchange 2010 box from Outlook.

In OL 2007 she gets the error "Your Exchange Server Administrator has blocked the version of Outlook that you are using" and in 2013 gets "Cannot start Microsoft Outlook. Cannot open the Outlook window. The set of folders cannot be opened. The file xxxx.ost is not an Outlook data file (.ost)." 

She can connect via OWA and her Android phone. This is happening on various PCs (her main one having had Office un/reinstalled) which suggests to me a problem with her mail profile. I can't see anything in the Exchange logs and AFAIK nothing has been done to her AD account. The Exchange box is patched and up to date and has been rebooted since the problem occurred. I'm at a loss to understand what's going on. Any ideas? 

Calum

Hi

I try to restore a public folder using ExFolder.

I get the Message "Recovery partially succeeded" but the folder isn't restored.

I also tryed to create a log file. The Folder was created but there is noc log file within the folder ?

Any help appreciated. Thanks in advance.

Henry

With Exchange 2003 you would see event ID's whenever an admin (or another user with mailbox permissions) opened up another users mailbox (e.g. added their mailbox to their Outlook profile).

I'm currently trying to use the EAC to create a mailbox audit log search. After filling in the Start date, End date, leaving the "Search these mailboxes" field blank to go through all the mailboxes on our system, and selecting "All non-owners", I'm not getting any results. I was under the impression the logging for this type of search was on by default.

Thanks for any feedback,

Dan

Just in the last week, we've had a handful of users receive bounce back messages saying they were not delivered. Generally, it will tell you what the issue is (user does not exist, attachment too large, etc.) but this one is no help. It is happening to internal and external emails. If the user gets the bounce back, closes Outlook, reopens Outlook and then tries sending it, it seems to go through. Below is the error in the Undeliverable reply. I don't see any errors in the Event Viewer on the Exchange Server. I've rebooted it but we're still having it occur.

'Receipient Name' on 1/2/2015 2:40 PM

            This message could not be sent. Try sending the message again later, or contact your network administrator.  Error is [0x80004005-00000000-00000000].

Really need some help with this. Researched all day and no fixes have helped.

Exchange 2010 - Windows 2008 R2 Standard.

EMC error: 

Connecting to remote server failed with teh following error message: The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid. 

It was running the command 'Discover-ExchangeServer -UseWIA $true-SuppressError $true - CurrentVersion "Version 14.1 (Build 218.15)". 

Exchange Management Shell error: 

Connecting to remote server failed with teh following error message: The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid. 

So i've read all day a ton of fixes, Time Sync, WinRM config IIS resets and so on, nothing fixes this. However, when I try to go to PowerShell Connections in IIS manager, no matter what I click on gives me the following error: 

There was an error while performing this operation 

C:\Windows\system32\inetsrv\config\applicaitonHost.config 

Line number: 301 

Error:can not log on locally to c:\program files\microsoft\exchange server\v14\clientaccess\powershell as user administrator with virtual directory password 

Please advise, I can't create any new email and I need to get this resolved. 

Mailflow is working fine.

EDIT: I pulled from an AppAssure backup the web.config file and replaced that in ClientAccess\PowerShell also and this did not resolve either.

Hi all-

     We're running Exchange 2010, which users access via Outlook, OWA, and smartphones/tablets. Our security auditors made the following recommendations for the "webmail" (CAS/Hub) servers:

1. Set SSL 3.0 to require TLS

2. Set SSL 2.0 to require TLS

3. Disable the "options method" in IIS

    Aside from the fact that I don't know how to do this, I'm a little concerned about making changes to SSL. By doing so, am I going to break any devices? I'm worried about smartphones not connecting, and users who open OWA on an XP machine.

Appreciate any advice/experiences.

Mike

Hi,

One of the CAS server i get error below after run the commad "Test-OutlookConnectivity -Protocol tcp"

      RFRI::GetReferral.                  Failure   -1.00

ErrorRecord: Task failed on timeout. Overtime = 00:07:49.4185783.
    + CategoryInfo          : OperationTimeout: (Microsoft.Excha...onnectivityTask:TestOutlookConnectivityTask) [Test-
   OutlookConnectivity], TaskException
    + FullyQualifiedErrorId : C918CCB1,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask

The casarray is defined on Hardware load balancer, versiyon is Exchange 2010 SP2 RU 4 v.2

how can i fix this problem?

Thank you in advance...

I am getting a failure when I try to move certain mailboxes from one database to another on my Exchange 2010 environment. Everything I find on the web shows something about permissions and seems to all be related to a Exchange 2003 to 2010 migration. The fix is to use PFDAVAdmin which seems to be old and I can't really tell if it supports 2010.

Here is the logs (Notice the different build numbers of the mailbox servers... however I verified that bot hservers are the same build)

1/3/2015 2:26:53 PM [MBX05] 'cloud.local/Service Accounts/Cloud Admin' created move request.
1/3/2015 2:26:53 PM [MBX05] 'cloud.local/Service Accounts/Cloud Admin' allowed a large amount of data loss when moving the mailbox (1000 bad items).
1/3/2015 4:26:31 PM [CAS01] The Microsoft Exchange Mailbox Replication service 'CAS01.cloud.local' (14.3.178.0 caps:07) is examining the request.
1/3/2015 4:26:31 PM [CAS01] Connected to target mailbox 'Primary (ebfa3d50-6acf-42f6-b962-4f54d42e8816)', database 'DAGMBX12', Mailbox server 'MBX04.cloud.local' Version 14.3 (Build 123.0).
1/3/2015 4:26:32 PM [CAS01] Connected to source mailbox 'Primary (ebfa3d50-6acf-42f6-b962-4f54d42e8816)', database 'DAGMBX01', Mailbox server 'MBX05.cloud.local' Version 14.3 (Build 210.0).
1/3/2015 4:26:32 PM [CAS01] Request processing started.
1/3/2015 4:26:32 PM [CAS01] Source mailbox information before the move:
Regular Items: 23075, 3.472 GB (3,728,375,254 bytes)
Regular Deleted Items: 0, 0 B (0 bytes)
FAI Items: 32, 0 B (0 bytes)
FAI Deleted Items: 0, 0 B (0 bytes)
1/3/2015 4:26:33 PM [CAS01] Initializing folder hierarchy in mailbox 'Primary (ebfa3d50-6acf-42f6-b962-4f54d42e8816)': 57 folders total.
1/3/2015 4:26:34 PM [CAS01] Folder hierarchy initialized for mailbox 'Primary (ebfa3d50-6acf-42f6-b962-4f54d42e8816)': 57 folders total.
1/3/2015 4:26:34 PM [CAS01] Stage: CreatingInitialSyncCheckpoint. Percent complete: 15.
1/3/2015 4:26:39 PM [CAS01] Stage: LoadingMessages. Percent complete: 20.
1/3/2015 4:26:44 PM [CAS01] Stage: CopyingMessages. Percent complete: 25.
1/3/2015 4:26:44 PM [CAS01] Copy progress: 0/23106 messages, 0 B (0 bytes)/3.472 GB (3,728,375,120 bytes).
1/3/2015 4:26:44 PM [CAS01] Messages have been enumerated successfully. 23106 items loaded. Total size: 3.472 GB (3,728,375,120 bytes).
1/3/2015 4:31:44 PM [CAS01] Stage: CopyingMessages. Percent complete: 33.
1/3/2015 4:31:44 PM [CAS01] Copy progress: 16936/23106 messages, 436.4 MB (457,646,004 bytes)/3.472 GB (3,728,375,120 bytes).
1/3/2015 4:36:45 PM [CAS01] Stage: CopyingMessages. Percent complete: 49.
1/3/2015 4:36:45 PM [CAS01] Copy progress: 17818/23106 messages, 1.193 GB (1,281,346,187 bytes)/3.472 GB (3,728,375,120 bytes).
1/3/2015 4:41:45 PM [CAS01] Stage: CopyingMessages. Percent complete: 64.
1/3/2015 4:41:45 PM [CAS01] Copy progress: 18892/23106 messages, 1.939 GB (2,081,746,911 bytes)/3.472 GB (3,728,375,120 bytes).
1/3/2015 4:46:46 PM [CAS01] Stage: CopyingMessages. Percent complete: 77.
1/3/2015 4:46:46 PM [CAS01] Copy progress: 20510/23106 messages, 2.626 GB (2,820,040,240 bytes)/3.472 GB (3,728,375,120 bytes).
1/3/2015 4:51:46 PM [CAS01] Stage: CopyingMessages. Percent complete: 86.
1/3/2015 4:51:46 PM [CAS01] Copy progress: 21657/23106 messages, 3.047 GB (3,271,846,706 bytes)/3.472 GB (3,728,375,120 bytes).
1/3/2015 4:54:56 PM [CAS01] Initial seeding completed, 23106 items copied, total size 3.472 GB (3,728,375,120 bytes).
1/3/2015 4:54:56 PM [CAS01] Changes reported in source 'Primary (ebfa3d50-6acf-42f6-b962-4f54d42e8816)': 0 changed folders, 0 deleted folders, 0 changed messages.
1/3/2015 4:54:56 PM [CAS01] Incremental Sync 'Primary (ebfa3d50-6acf-42f6-b962-4f54d42e8816)' completed: 0 changed items.
1/3/2015 4:54:56 PM [CAS01] Stage: IncrementalSync. Percent complete: 95.
1/3/2015 4:54:56 PM [CAS01] Final sync has started.
1/3/2015 4:54:57 PM [CAS01] Changes reported in source 'Primary (ebfa3d50-6acf-42f6-b962-4f54d42e8816)': 0 changed folders, 0 deleted folders, 0 changed messages.
1/3/2015 4:54:57 PM [CAS01] Incremental Sync 'Primary (ebfa3d50-6acf-42f6-b962-4f54d42e8816)' completed: 0 changed items.
1/3/2015 4:55:01 PM [CAS01] Fatal error MapiExceptionNoSupport has occurred.
Error details: MapiExceptionNoSupport: IExchangeFastTransferEx.TransferBuffer failed (hr=0x80040102, ec=-2147221246)
Diagnostic context:
    Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=773]
    Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=513][latency=15]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropFXDstCopyConfig [83]
    Lid: 27962   ROP: ropTellVersion [134]
    Lid: 27962   ROP: ropFXDstPutBufferEx [157]
    Lid: 17082   ROP Error: 0x80040102
    Lid: 31329
    Lid: 21921   StoreEc: 0x80040102
    Lid: 27962   ROP: ropExtendedError [250]
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 1238    Remote Context Overflow
    Lid: 25000
    Lid: 24936
    Lid: 4367    StoreEc: 0x80040102
    Lid: 7695    StoreEc: 0x80040102
    Lid: 19936
    Lid: 4559    StoreEc: 0x80040102
    Lid: 21802
    Lid: 19994   StoreEc: 0x80040102
    Lid: 20202
    Lid: 3305    StoreEc: 0x80040102
    Lid: 32762   dwParam: 0xE080003
    Lid: 32762   dwParam: 0xE230003
    Lid: 32762   dwParam: 0xE270102
    Lid: 32762   dwParam: 0xE580102
    Lid: 32762   dwParam: 0xE590102
    Lid: 32762   dwParam: 0xF000102
    Lid: 32762   dwParam: 0xFF40003
    Lid: 32762   dwParam: 0x10F4000B
    Lid: 32762   dwParam: 0x10F5000B
    Lid: 32762   dwParam: 0x10F6000B
    Lid: 32762   dwParam: 0x300184B0
    Lid: 32762   dwParam: 0x300484B0
    Lid: 32762   dwParam: 0x3FE5000B
    Lid: 32762   dwParam: 0x361C0102
    Lid: 32762   dwParam: 0x361384B0
    Lid: 32762   dwParam: 0x36170003
    Lid: 26346
    Lid: 4073    StoreEc: 0x80040102
    Lid: 28570   StoreEc: 0x80040102
    Lid: 29738
    Lid: 3401    StoreEc: 0x80040102
    Lid: 1750    ---- Remote Context End ----
    Lid: 26849
    Lid: 21817   ROP Failure: 0x80040102
    Lid: 22630
   at Microsoft.Exchange.MailboxReplicationService.AsynchronousTransmitter.WaitUntilDataIsProcessed()
   at Microsoft.Exchange.MailboxReplicationService.AsynchronousTransmitter.Microsoft.Exchange.MailboxReplicationService.IDataImport.ImportBuffer(Int32 opcode, Byte[] data)
   at Microsoft.Exchange.MailboxReplicationService.AsynchronousTransmitter.Microsoft.Exchange.MailboxReplicationService.IDataImport.Flush()
   at Microsoft.Exchange.MailboxReplicationService.ProgressTrackerTransmitter.Microsoft.Exchange.MailboxReplicationService.IDataImport.Flush()
   at Microsoft.Exchange.MailboxReplicationService.FxProxyTransmitter.Microsoft.Exchange.MailboxReplicationService.IFxProxy.Flush()
   at Microsoft.Exchange.MailboxReplicationService.LocalSourceFolder.Microsoft.Exchange.MailboxReplicationService.ISourceFolder.CopyTo(IFxProxy destFolderProxy, PropTag[] excludeTags)
   at Microsoft.Exchange.MailboxReplicationService.SourceFolderWrapper.<>c__DisplayClass1.<Microsoft.Exchange.MailboxReplicationService.ISourceFolder.CopyTo>b__0()
   at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
   at Microsoft.Exchange.MailboxReplicationService.SourceFolderWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceFolder.CopyTo(IFxProxy destFolder, PropTag[] excludeTags)
   at Microsoft.Exchange.MailboxReplicationService.MailboxCopierBase.CopyFolderProperties(FolderRecWrapper folderRec, ISourceFolder sourceFolder, IDestinationFolder destFolder, FolderRecDataFlags dataToCopy)
   at Microsoft.Exchange.MailboxReplicationService.MailboxMover.<>c__DisplayClass2.<>c__DisplayClass4.<FinalSyncCopyAllFolders>b__1()
   at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
   at Microsoft.Exchange.MailboxReplicationService.MailboxMover.<>c__DisplayClass2.<FinalSyncCopyAllFolders>b__0(FolderRecWrapper folderRec, EnumFolderContext ctx)
   at Microsoft.Exchange.MailboxReplicationService.FolderMap.EnumSingleFolder(FolderRecWrapper folderRec, EnumFolderContext ctx, EnumFolderCallback callback, EnumHierarchyFlags flags)
   at Microsoft.Exchange.MailboxReplicationService.FolderMap.EnumSingleFolder(FolderRecWrapper folderRec, EnumFolderContext ctx, EnumFolderCallback callback, EnumHierarchyFlags flags)
   at Microsoft.Exchange.MailboxReplicationService.FolderMap.EnumSingleFolder(FolderRecWrapper folderRec, EnumFolderContext ctx, EnumFolderCallback callback, EnumHierarchyFlags flags)
   at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyAllFolders()
   at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.<FinalSync>b__4d(MailboxMover mbxCtx)
   at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
   at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
   at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: IMapiFxProxy.ProcessRequest
OpCode: TransferBuffer
DataLength: 1023
--------
Operation: IMapiFxProxy.ProcessRequest
OperationSide: Target
Primary (ebfa3d50-6acf-42f6-b962-4f54d42e8816)
OpCode: TransferBuffer
DataLength: 1023
1/3/2015 4:55:01 PM [CAS01] Relinquishing job.
1/5/2015 9:14:17 AM [MBX05] 'cloud.local/Service Accounts/Cloud Admin' resumed move request.
1/5/2015 9:14:22 AM [CAS01] Job resumed with status 'InProgress'.
1/5/2015 9:14:22 AM [CAS01] Relinquishing job.
1/5/2015 9:14:28 AM [CAS01] The Microsoft Exchange Mailbox Replication service 'CAS01.cloud.local' (14.3.178.0 caps:07) is examining the request.
1/5/2015 9:14:28 AM [CAS01] Connected to target mailbox 'Primary (ebfa3d50-6acf-42f6-b962-4f54d42e8816)', database 'DAGMBX12', Mailbox server 'MBX04.cloud.local' Version 14.3 (Build 210.0).
1/5/2015 9:14:28 AM [CAS01] Connected to source mailbox 'Primary (ebfa3d50-6acf-42f6-b962-4f54d42e8816)', database 'DAGMBX01', Mailbox server 'MBX05.cloud.local' Version 14.3 (Build 210.0).
1/5/2015 9:14:28 AM [CAS01] Request processing continued, stage IncrementalSync.
1/5/2015 9:14:29 AM [CAS01] Changes reported in source 'Primary (ebfa3d50-6acf-42f6-b962-4f54d42e8816)': 2 changed folders, 0 deleted folders, 3 changed messages.
1/5/2015 9:14:30 AM [CAS01] Incremental Sync 'Primary (ebfa3d50-6acf-42f6-b962-4f54d42e8816)' completed: 12 changed items.
1/5/2015 9:14:30 AM [CAS01] Stage: IncrementalSync. Percent complete: 95.
1/5/2015 9:14:30 AM [CAS01] Final sync has started.
1/5/2015 9:14:30 AM [CAS01] Changes reported in source 'Primary (ebfa3d50-6acf-42f6-b962-4f54d42e8816)': 0 changed folders, 0 deleted folders, 0 changed messages.
1/5/2015 9:14:30 AM [CAS01] Incremental Sync 'Primary (ebfa3d50-6acf-42f6-b962-4f54d42e8816)' completed: 0 changed items.
1/5/2015 9:14:31 AM [CAS01] Fatal error MapiExceptionNoSupport has occurred.
Error details: MapiExceptionNoSupport: IExchangeFastTransferEx.TransferBuffer failed (hr=0x80040102, ec=-2147221246)
Diagnostic context:
    Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=772]
    Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=513][latency=15]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropFXDstCopyConfig [83]
    Lid: 27962   ROP: ropTellVersion [134]
    Lid: 27962   ROP: ropFXDstPutBufferEx [157]
    Lid: 17082   ROP Error: 0x80040102
    Lid: 31329
    Lid: 21921   StoreEc: 0x80040102
    Lid: 27962   ROP: ropExtendedError [250]
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 1238    Remote Context Overflow
    Lid: 25000
    Lid: 24936
    Lid: 4367    StoreEc: 0x80040102
    Lid: 7695    StoreEc: 0x80040102
    Lid: 19936
    Lid: 4559    StoreEc: 0x80040102
    Lid: 21802
    Lid: 19994   StoreEc: 0x80040102
    Lid: 20202
    Lid: 3305    StoreEc: 0x80040102
    Lid: 32762   dwParam: 0xE080003
    Lid: 32762   dwParam: 0xE230003
    Lid: 32762   dwParam: 0xE270102
    Lid: 32762   dwParam: 0xE580102
    Lid: 32762   dwParam: 0xE590102
    Lid: 32762   dwParam: 0xF000102
    Lid: 32762   dwParam: 0xFF40003
    Lid: 32762   dwParam: 0x10F4000B
    Lid: 32762   dwParam: 0x10F5000B
    Lid: 32762   dwParam: 0x10F6000B
    Lid: 32762   dwParam: 0x300184B0
    Lid: 32762   dwParam: 0x300484B0
    Lid: 32762   dwParam: 0x3FE5000B
    Lid: 32762   dwParam: 0x361C0102
    Lid: 32762   dwParam: 0x361384B0
    Lid: 32762   dwParam: 0x36170003
    Lid: 26346
    Lid: 4073    StoreEc: 0x80040102
    Lid: 28570   StoreEc: 0x80040102
    Lid: 29738
    Lid: 3401    StoreEc: 0x80040102
    Lid: 1750    ---- Remote Context End ----
    Lid: 26849
    Lid: 21817   ROP Failure: 0x80040102
    Lid: 22630
   at Microsoft.Exchange.MailboxReplicationService.AsynchronousTransmitter.WaitUntilDataIsProcessed()
   at Microsoft.Exchange.MailboxReplicationService.AsynchronousTransmitter.Microsoft.Exchange.MailboxReplicationService.IDataImport.ImportBuffer(Int32 opcode, Byte[] data)
   at Microsoft.Exchange.MailboxReplicationService.AsynchronousTransmitter.Microsoft.Exchange.MailboxReplicationService.IDataImport.Flush()
   at Microsoft.Exchange.MailboxReplicationService.ProgressTrackerTransmitter.Microsoft.Exchange.MailboxReplicationService.IDataImport.Flush()
   at Microsoft.Exchange.MailboxReplicationService.FxProxyTransmitter.Microsoft.Exchange.MailboxReplicationService.IFxProxy.Flush()
   at Microsoft.Exchange.MailboxReplicationService.LocalSourceFolder.Microsoft.Exchange.MailboxReplicationService.ISourceFolder.CopyTo(IFxProxy destFolderProxy, PropTag[] excludeTags)
   at Microsoft.Exchange.MailboxReplicationService.SourceFolderWrapper.<>c__DisplayClass1.<Microsoft.Exchange.MailboxReplicationService.ISourceFolder.CopyTo>b__0()
   at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
   at Microsoft.Exchange.MailboxReplicationService.SourceFolderWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceFolder.CopyTo(IFxProxy destFolder, PropTag[] excludeTags)
   at Microsoft.Exchange.MailboxReplicationService.MailboxCopierBase.CopyFolderProperties(FolderRecWrapper folderRec, ISourceFolder sourceFolder, IDestinationFolder destFolder, FolderRecDataFlags dataToCopy)
   at Microsoft.Exchange.MailboxReplicationService.MailboxMover.<>c__DisplayClass2.<>c__DisplayClass4.<FinalSyncCopyAllFolders>b__1()
   at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
   at Microsoft.Exchange.MailboxReplicationService.MailboxMover.<>c__DisplayClass2.<FinalSyncCopyAllFolders>b__0(FolderRecWrapper folderRec, EnumFolderContext ctx)
   at Microsoft.Exchange.MailboxReplicationService.FolderMap.EnumSingleFolder(FolderRecWrapper folderRec, EnumFolderContext ctx, EnumFolderCallback callback, EnumHierarchyFlags flags)
   at Microsoft.Exchange.MailboxReplicationService.FolderMap.EnumSingleFolder(FolderRecWrapper folderRec, EnumFolderContext ctx, EnumFolderCallback callback, EnumHierarchyFlags flags)
   at Microsoft.Exchange.MailboxReplicationService.FolderMap.EnumSingleFolder(FolderRecWrapper folderRec, EnumFolderContext ctx, EnumFolderCallback callback, EnumHierarchyFlags flags)
   at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyAllFolders()
   at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.<FinalSync>b__4d(MailboxMover mbxCtx)
   at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
   at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
   at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: IMapiFxProxy.ProcessRequest
OpCode: TransferBuffer
DataLength: 1023
--------
Operation: IMapiFxProxy.ProcessRequest
OperationSide: Target
Primary (ebfa3d50-6acf-42f6-b962-4f54d42e8816)
OpCode: TransferBuffer
DataLength: 1023
1/5/2015 9:14:31 AM [CAS01] Relinquishing job.

Hi,

I have two Exchange 2010 servers hosted at Rackspace. I also have a Firewall at Rackspace

In my Queue Viewer, I see the following error next to  a queue called "hub version 14":

451 4.4.0 Primary target IP address responded with: “451 5.7.3 Cannot achieve Exchange Server authentication.” Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.

My two servers are
Mail 1 and Mail2

If I am on Mail 1 and I do "Telnet localhost 25" then ehlo, I get a set of SMTP commands

SIZE
PIPELINING
DSN
ENHANCEDSTATUSCODES
STARTTLS
X-ANONYMOUSETLS
AUTH NTLM
X-EXPS GSSAPI NTLM
8BITMIME
BINARYMIME
CHUNKING
XEXCH50
XRDST
XSHADOW

If I am on Mail 1 and I do a "Telnet Mail 2 25"  then ehlo, I get a set of SMTP verbs but not all of the ones I got when I tried the localhost telnet.

SIZE
PIPELINING
DSN
ENHANCEDSTATUSCODES
AUTH NTLM
X-EXPS GSSAPI NTLM
8BITMIME
BINARYMIME
CHUNKING

Is it normal for these lists to be different in the two cases above or is this an indication that the firewall is blocking some commands that require my Exchange servers to communicate fully?

Thanks!
Mike

Our 2012 Exchange environment is pretty new, and I am a junior Admin. We are trying to create scripts to add to an admin console for our Level 1/2 support. We have a script (array) to add a manager to a DL (we use security groups for all of our DLs), but the "-=" method isn't working, and upon investigation, they added the ability to use -ManagedBy @{add="";remove=""}. However, no matter what we do, neither method works.

When using the new way with @{, we get the below (note, for the "name" it doesn't matter what we use for the users identity):

[PS] C:\Scripts>Set-DistributionGroup -Identity DLNAME -ManagedBy @{remove="Name"}
All groups must have at least one owner who manages membership, message approval, and other settings for the group. Make sure you assign an owner for this group.
    + CategoryInfo          : NotSpecified: (:) [], RecipientTaskException
    + FullyQualifiedErrorId : A2F70477

Hi,

after migration (coexistence) from Exch2k7, we have only one user (among 160) who cannot receive emails, doesn´t matter if it´s comming from internal user or external and also doesn´t matter if we are checking that mailbox using MS Outlook or OWA interface; right now I performed a test to redirect (message mailflow) its mailbox to another and it works; I tried to redirect and also save a copy to himself but no success. After disable that redirection, the issue remains the same.

If we use another mailbox with Ms Outlook to send new mail and set the notification for delivery/read; we receive an alert regarding the 'delivery' only.

Using MessageTracking CMDLET to .CSV file, shows the following - when send externally to this user/mailbox:

SMTP ; RECEIVE
STOREDRIVER ; DELIVER

If we use the CMDLET 'Get-Mailbox -Identity "Exchange2010User" | FL' for this user and to another working fine, there is no differences.

That mailbox resides on a database with more 15 others users and using the CMDLET 'get-queue |where-object {$_.NextHopDomain -like "mbx2"}' show no messages waint for delivery.

>>> Can someone help us to troubleshoot this case? Any help is appreciated.

hi

i have 2 Exchange 2010 servers in which i have enabled Lync integration with one of the server's OWA virtual directory.

This is working for all Users mailbox that exists in this server. But the users who are in another Exchange was not able to get this integration.

In lync, trusted application pool has the correct FQDN of my CAS where integration is enabled.

Now if i call this Server url in OWA and login with second Exchange server DB user, the OWA lync is not working.

do i need to do anything more to make sure all Users in both the servers have lync integration.

Or is it possible to have both the exchange server's OWA URL to have Lync integration enabled?

regards Sundaresan.C

Mail server is acting on a random base, because some e-mails are accepted and some email are rejected with NDR :SMTPSEND.BareLinefeedsAreIllegal; message contains bare linefeeds, which cannot be sent via DATA

 is this an error at the sender side? Or What changes need to do order to receive sender e-mails ?